VOC Exempt Lubricants

Products Description: VOC Exempt Silicone Lubricants are 100% silicone-based lubricants that are exempt from federal VOC regulations including California CARB and South Coast Air Quality. They are HAP-free and RoHS Compliant.

VOC Exempt Silicone Solvents contain no petroleum distillates, petroleum solvents or propellants.

The active ingredient is Polydimethylsiloxane fluid that is dispersed in a cyclic siloxane. The lubricant is clear, colorless and odorless. VOC Exempt Silicone Lubricants can be applied to a wide range of surfaces including plastic, rubber & vinyl.

Due to these properties, they are being widely accepted as replacements for non-VOC complaint petroleum-based solvents and aerosols.

Why a VOC Exempt Silicone Lubricant for Plastic & Rubber?

  • Exempt from federal VOC Regulations including CARB and South Coast Air Quality
  • HAP-Free
  • Contain No Petroleum-Distillates or Solvents
  • Excellent Lubricity
  • Compatible with virtually all Plastic and Rubber Materials
  • Reduces Coefficient of Friction
  • Non-Reactive
  • Low surface tension
  • Reduces friction
  • Long service life

Better lubricating properties for silicone and rubber than petroleum-based or glycol-based lubricants.

Cyclo-Sil6 VOC Exempt Silicone Lubricant

Cyclo-Sil6 VOC Exempt Silicone Lubricant is a formulation of Silicone (Polydimethylsiloxane) that is dispersed in cyclic-siloxane. The fluid is clear, colorless and odorless with a viscosity close to water that is easily applied thru a hand sprayer. Cyclo-Sil6 imparts a thin film of silicone on the surface that provides excellent lubricity. It is an excellent lubricant for rubber and plastics parts.

More Info >>>

Hexa-Sil6 VOC Exempt Silicone Lubricant

faster evaporation!!

Hexa-Sil6 is a similar formulation to the Cyclo-Sil6 but has faster evaporation and a preferred product where a dryer film is preferred.

More Info >>>

SE60-2012 VOC Exempt Silicone Lubricant

(water-based)

SE60-2012 VOC Exempt Silicone Lubricant is a non-flammable, non-toxic and non-reactive silicone emulsion that is comprised of 60% active silicone (Polydimethylsiloxane fluid). It is compatible with virtually all plastic and rubber surfaces including EPDM, Neoprene, Natural Rubber, Teflon, virgin, Butyl, Nitrile, Styrene Butadiene, Buna-N, PVC, LDPE, HDPE.

SE60-2012 VOC Exempt Silicone Lubricant is intended to be diluted by simply adding water. One-gallon can make up to 10-gallons of finished product. Like Cyclo-Sil6 and Hexa-Sil6, it is easily applied via hand sprayer/power sprayer.

More Info >>>