Clean, Clear, Silicone Oils and Lubricants from Clearco .
215-366-7860
15 York Road • Willow Grove, PA 19090 USA

Pure Silicone Fluids

Products Description: Clearco Pure Silicone Fluids are clear, colorless and odorless linear 100% Polydimethylsiloxane Silicone Fluids / PDMS Silicone Oils that range in viscosity from 0.65cSt to 1 million cSt (measured @ 25°C).

Viscosities > 5cSt are characterized by their wide service temperature range, high resistance to oxidation, high damping action, excellent lubricity, low viscosity change at temperature (Low VTC), compatibility with O-rings, gaskets and valve materials, and high dielectric strength.

Lower viscosities are characterized by their low pour points, low temperature stability, low viscosity and low viscosity change at temperature (Low VTC)(even at extremely low temperatures), low surface tension, high compressibility and high dielectric strength.

Pure Silicone Fluids are widely used as laboratory bath fluids, heat transfer fluids, dielectric fluids, damping fluids for gauges and instruments, high pressure fluids, low temperature fluids, high temperature fluids, lubricants for plastic and rubber parts, O-ring lubricants, gasket lubricants, ink release agents, anti-foam agent and down-hole fluids for oil/gas industry, turbo-generator fluids, flow control fluids, vibration damping fluids, wetting agents, hydrophobic fluids, high UV resistance fluids, calibration fluids, hydraulic fluids and for optical fluids for applications such as RI matching.

For Further information, see Introduction to Silicone Fluids.

 

Super Low Viscosity Silicone Fluids

Super Low Viscosity Pure Silicone Fluids are clear, colorless, and odorless linear Polydimethylsiloxane fluids / PDMS Silicone Oils that range in viscosities from 0.65cSt (thinner than water) to 2cSt (centistokes) @ 25°C.

Low Viscosity Silicone Fluids

Low Viscosity Pure Silicone Fluids are clear, colorless, and odorless linear Polydimethylsiloxane fluids / PDMS Silicone Oils that range in viscosities from 5cSt to 20cSt (centistokes) @ 25°C.

Standard Viscosity Silicone Fluids

Standard Viscosity Pure Silicone Fluids are clear, colorless, and odorless linear Polydimethylsiloxane fluids / PDMS Silicone Oils that range in viscosities from 50cSt to 1,000cSt (centistokes) @ 25°C.

High Viscosity Silicone Fluids

High Viscosity Pure Silicone Fluids are clear, colorless, and odorless linear Polydimethylsiloxane fluids / PDMS Silicone Oils that range in viscosities from 5,000cSt to 100,000cSt (centistokes) @ 25°C.

Super High Viscosity Silicone Fluids

Clearco Super-High Viscosity Pure Silicone Fluids are clear, colorless and odorless linear Polydimethylsiloxane oils (Polydimethylsiloxanes) that range in viscosities from 300,000cSt, 600,000cSt, 1 million cSt, 2,500,000cSt (2.5 million cSt) & 20,000,000cSt (20 million cSt).

Pure Silicone 350cSt NSF H1 Food Grade

Silicone Grease 2012 NSF 61 is registered with the NSF and meets the requirements of NSF/ANSI Standard 61 for water portable applications. It is widely used on O‐rings, valves, gaskets and assorted plumbing components that require an NSF 61 water potable lubricant/compound. Further, Silicone Grease 2012 meets FDA 21 CFR 175.300 requirements for use as a lubricant for incidental contact with food in food processing and food packaging application