High Performance Zinc Spray
93% Zinc in the dry film…..provides the equivalent corrosion protection of Hot Dip Galvanizing
Use: High Performance Zinc Spray is a fast drying coating that protects steel and ferrous metals exposed to severe corrosive environments. This high performance epoxy compound fuses zinc to the metal substrate and provides long-term galvanic protection against corrosion equal to Hot Dip Galvanizing.
The finished film of High Performance Zinc Spray contains 93% Zinc that protects the surface, even when penetrated or scratched, as an insoluble Zinc Oxide coating that forms over the exposed area. High Performance Zinc Spray meets ASTM A780 specifications and is widely used for recoating and touching-up damaged galvanized surfaces.
After curing, High Performance Zinc Spray may be coated with conventional primers and finishes such as epoxy, urethanes, acrylics & chlorinated rubber. High Performance Spray is highly Resistant to salt corrosion & water. It is formulated for heavy maintenance, and is used on exterior surfaces subjected to severe corrosion & rust conditions.
Properties:
- 93% Organic Zinc in Dry Film
- Long Term Galvanic Corrosion Protection
- Meets ASTM A780 Specifications for touch up and repair of Hot Dip Galvanized surfaces
- Provides the equivalent protection of Hot Dip Galvanize to damaged galvanized surfaces.
- Self-healing: provides protection even when scratched.
- Long term protection against salt corrosion
- Single package epoxy
- Convenient on-site application…avoids expense of shipping parts to a Hot Dip Galvanizing
Product Data
| Appearance | Gray |
| Can Size | 16 fl. oz. |
| Net Weight | 14 oz. net wt. |
| Packing | 12 x 14 oz. net wt. cans per case |
| Coverage per Can | 1 Mil = 25 Sq. Ft. 2-1/2 Mil = 10 Sq. Ft. |
| Zinc Content | 90+% in Dry Film |
| Drying Time | 5-Minutes to Touch 12-Hours to Total Cure |
| Temperature Resistance | 400°F – Sustained 600°F – Intermittent |
Surface Preparation:
In order to provide galvanic protection, it is critical that the surface be free of oil, moisture, rust, paint before applying. The zinc must have contact with the bare metal surface to provide an electrically conductive (galvanic) film. Solvent cleaning (SSPC-SP1) is usually sufficient for new steel surfaces.
For previously Painted Surfaces, wire brush cleaning (SSPC-SP2), power tool cleaning, (SSPC-SP3) or commercial blast cleaning (SSPC-SP6) may be necessary to remove all rust and loose paint. Again, zinc must have contact with bare metal to provide galvanic protection.
Availability: 12 x 14oz net wt aerosol cans per case
Silvercoat Bright Galvanizing Spray
Brighter Appearance that more closely matches the appearance of Hot Dip Galvanize
Use: Silvercoat Bright Galvanizing Spray is a fast drying coating that protects steel and ferrous metals exposed to severe corrosive environments. It provides the long-lasting protection of zinc, yet closely matches the bright color of Hot Dip Galvanizing.
Silvercoat Bright Galvanizing Spray is high performance epoxy compound fuses zinc to the metal substrate and provides long-term galvanic protection against corrosion. It is highly resistant to salt corrosion & water. Silvercoat Bright Galvanizing Spray contains 70% zinc in the dry film. It meets ASTM A780 specifications for the touch-up and repair of Hot Dip, and is widely used for recoating and touching-up damaged galvanized surfaces.
Silvercoat Bright Galvanizing Spray is self-healing, and prevents creepage even when the surface is penetrated or scratched. After curing, it may be coated with conventional primers and finishes such as epoxy, urethanes, acrylics & chlorinated rubber. However, due to its bright appearance, Silvercoat is most often used as both a cold galvanizing primer and topcoat.
Properties:
- 70% Organic Zinc in Dry Film
- Long Term Galvanic Corrosion Protection
- Combines bright appearance of Hot Dip Galvanize with long-term protection of Zinc
- Meets ASTM A780 Specifications for touch up and repair of Hot Dip Galvanized surfaces
- Provides the equivalent protection of Hot Dip Galvanize to damaged galvanized surfaces.
- Self-healing: provides protection even when scratched.
- Long term protection against salt corrosion
- Single package epoxy
- Convenient on-site application…avoids expense of shipping parts to a Hot Dip Galvanizing
Product Data
| Appearance | Bright Silver Zinc |
| Can Size | 16 oz. can size |
| Net wt per can | 12 oz. net wt. (340g) |
| Packaging | 12 x 12oz net wt cans per case |
| Coverage per Can | 1 Mil = 18 Sq. Ft. 2-1/2 Mil = 7.5 Sq. Ft. |
| Zinc Content | 70% in Dry Film |
| Drying Time | 5- Minutes to Touch 12- Hours to Total Cure |
| Temperature Resistance | 400°F – Sustained 600°F – Intermittent |
Surface Preparation:
In order to provide galvanic protection, it is critical that the surface be free of oil, moisture, rust, paint before applying. The zinc must have contact with the bare metal surface to provide an electrically conductive (galvanic) film. Solvent cleaning (SSPC-SP1) is usually sufficient for new steel surfaces.
For previously Painted Surfaces, wire brush cleaning (SSPC-SP2), power tool cleaning, (SSPC-SP3) or commercial blast cleaning (SSPC-SP6) may be necessary to remove all rust and loose paint. Again, zinc must have contact with bare metal to provide galvanic protection.
Availability: 12 x 12oz net wt cans per case
Cold Galvanizing Spray
90% Zinc in the dry film…..provides the equivalent corrosion protection of Hot Dip Galvanizing
Use: Cold Galvanizing Spray is a fast drying coating that protects steel and ferrous metals exposed to severe corrosive environments. This high performance epoxy compound fuses zinc to the metal substrate and provides long-term galvanic protection against corrosion equal to Hot Dip Galvanizing.
The finished film of Cold Galvanizing Spray Spray contains 90% Zinc that protects the surface, even when penetrated or scratched, as an insoluble Zinc Oxide coating that forms over the exposed area. High Performance Zinc Spray meets ASTM A780 specifications and is widely used for recoating and touching-up damaged galvanized surfaces.
After curing, Cold Galvanizing Spray may be coated with conventional primers and finishes such as epoxy, urethanes, acrylics & chlorinated rubber. High Performance Spray is highly Resistant to salt corrosion & water. It is formulated for heavy maintenance, and is used on exterior surfaces subjected to severe corrosion & rust conditions.
Properties:
- 90% Organic Zinc in Dry Film
- Long Term Galvanic Corrosion Protection
- Meets & exceeds ASTM A780 Specifications for touch up and repair of Hot Dip Galvanized surfaces
- Provides the equivalent protection of Hot Dip Galvanize to damaged galvanized surfaces.
- Self-healing: provides protection even when scratched.
- Long term protection against salt corrosion
- Single package epoxy
- Convenient on-site application…avoids expense of shipping parts to a Hot Dip Galvanizing
Product Data
| Appearance | Gray |
| Can Size | 16 oz. |
| Net Wt. | 15 oz. net wt. (425g) |
| Packing | 12-15 oz. net wt. cans per case |
| Coverage-per-can | 1-mil = 25 Sq. Ft. 2-1/2 mil = 10 Sq. Ft. |
| Zinc Content | 90+% in Dry Film |
| Drying Time | 5-minutes to Touch 12-hours to Total Cure |
| Temperature Resistance | 400F – Sustained 600F – Intermittent |
Surface Preparation:
In order to provide galvanic protection, it is critical that the surface be free of oil, moisture, rust, paint before applying. The zinc must have contact with the bare metal surface to provide an electrically conductive (galvanic) film. Solvent cleaning (SSPC-SP1) is usually sufficient for new steel surfaces.
For previously Painted Surfaces, wire brush cleaning (SSPC-SP2), power tool cleaning, (SSPC-SP3) or commercial blast cleaning (SSPC-SP6) may be necessary to remove all rust and loose paint. Again, zinc must have contact with bare metal to provide galvanic protection.
Availability: 12 x 15oz net wt aerosol cans per case


