PSF-Silicone Cable Pulling Lubricants
Chemical Name: 100% Polydimethylsiloxane (Dimethylpolysiloxane) Fluids
Clearco offers a wide range of Silicone Cable Pulling Lubricants to meet low temperature, high temperature, viscosity and environmental requirements.
View product specs:Click here to view
View MSDS:Click here to view
Availability: 1-gallon, 5-gallon pail & 55-gallon drums
PSF-Silicone Cable Pulling Lubricants are clear, colorless and odorless 100% Silicones (Polydimethylsiloxane) that contains no water/solvent or petroleum distillates. They are Non-toxic, Non-Flammable, Non-Reactive and compatible with virtually all cable and duct components such as PVC and HDPE.
In comparison to glycol and petroleum-based fluids, the PSF-Cable Pulling Lubricants have higher flash points and lower pour points. At low temps, they will not freeze and at high temps, they will not break down or evaporate. Due to their wide service temp range, they are excellent fluids for cable / wire pulling applications in extreme environments.
Further, the fluids are exempt from all federal VOC regulations including California CARB and South Coast Air Quality.
PSF-Silicone Cable Pulling Lubricants are compatible with virtually all o-rings, gaskets, valves and seals with the exception of silicone o-rings.
Other Applications include: wire lubricant, rubber hose lubricant, gaskets lubricant, valve lubricant, o-rings lubricant and seal lubricant.
- Non-Toxic, Non-Flammable & Non-Reactive
- High Cling
- Wide service temperature range: -40°C to 170° C (open system), -40° C to 230° C (closed system)
- High Oxidation Resistance
- High Dielectric Strength
- High Resistance To Shear
- VOC Exempt
- Low Pour Point
- Clear, colorless, odorless fluids
- Excellent Lubrication for plastic and rubber
- Excellent Thermal Stability